Grains kit "Red Ale" for beer making

Grains kits

Description

Grains kit "Red Ale" for beer making

  • Colour: 27 EBC
  • Bitterness: 16 IBU
  • Initial density: 11.5 SG
  • Final density: 2-3 SG
  • Alcohol: 4% ABV

Composition:

  • Light malt (Pilsen)
  • Special malt (Munich)
  • Special malt (Cara 250)
  • Glucose
  • Hop
  • Yeasts
  • Recommended fermentation temperature: 18 – 22 degrees centigrade

History: Red beer is popular, first of all, in Ireland where it is made with the addition of caramel malt. It is also popular in Belgium. Flavour: The beverage has a complex fruit combination due to caramel malt. It resembles black cherry, oranges or red currant. The hop flavour is virtually indiscernible. Description of a visual appearance: Reddish and brown colour. Good transparency.

Medium foam retention. Taste: Intense fruit taste including orange, black cherry or red currant tastes. Spicy phenols in small amounts. Moderate hopped bitterness. Instruction The kit for making of 20 liters of beer One-pause mashing at 65о С – 60 minutes Wort boiling - 90 minutes Hop No.1 – 75 minutes before the wort stops boiling Hop No.2 - 15 minutes before the wort stops boiling Fermentation should be conducted at 18-22о С 7-10 days of fermentation 14-21 days of maturation Necessary equipment: Boiler 30 l. Enamel pan will be OK.

False bottom for filtering or a canvas bag. Isothermic jacket for a 30 liter boiler (or a blanket). Fermentation tank. Pour 15 l of water in a boiler and warm it up to 74о С. Pour crushed malt from a big sack, stir it to avoid lumps. The mash temperature shall be 65 degrees centigrade, if lower, increase up to the required one by warming it up on a low heat and stirring. Avoid malt sticking to the bottom. Isolate (make coldproof) the boiler with the jacket or a simple blanket. mashing time is 60 minutes.

Prepare 9 liters of water to wash the distiller's grain, the necessary temperature is 70-80о С. Filter the wort with a colander into an intermediate tank (you can use a fermentation tank) and wash the distiller's grain with warmed water. Wash the boiler, pour the wort into it and start heating.

When the wort boils, boil it for 90 minutes more adding the hop from the package No.1 15 minutes after boiling for bitterness. 15 minutes before boiling stops add the hop from the package No.2 for flavour. Cool the wort as quickly as possible in the pot to 30о С. Use the "chiller" or simply put the container into a bath with cold water. Pour the cooled wort into the fermentation tank and add yeasts. In 7-10 days fermentation will be finished.

Carefully pour the obtained beer from the residue into the intermediate tank, add glucose from the kit package and mix. Pour the beer for carbonization (natural aeration) into bottles. In 3-4 days place the obtained beer in a dark cool place for maturation during 14-21 days.

Net weight - 4.15 kg.

Technical features:

4.15 kg